BGPTR - J-CIL SAE 10W MOTOR OIL
- MSDS: BGPTR
- Manufacturer: E C MORRIS CORP
- Product Name: J-CIL SAE 10W MOTOR OIL
- National Stock Number: 9150-01-177-3988
Product Identification
Product ID:J-CIL SAE 10W MOTOR OIL
MSDS Date:01/01/1987
FSC:9150
NIIN:01-177-3988
MSDS Number: BGPTR
Responsible Party
Emergency Phone: 216-264-1126
Cage: KO522
Contractor
Telephone: 216-264-1126
Cage: 5X433
Ingredients
REFINED PETROLEUM OIL
Fraction By Weight: 91%
DETERGENT INHIBITOR(CONTAINS ZINC DIALKYLDITHIOPHOSPHATE)
Fraction By Weight: 8.6%
POUR DEPRESSANT
Fraction By Weight: 0.4%
Hazards
Effects of Overexposure:PNEUMONITIS IF ABOVE TLV;ING & INH MAY CAUSE
DROWSINESS,HEADACHE,NAUSEA.
First Aid
First Aid:SKIN:WASH W.SOAP & H*2O. EYES:FLUSH W. H*2O. INGESTED:DON'T
INDUCE VOMITING. INHALED:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NEED. KEEP WARM & QUIET. REMOVE CONTAMINATED CLOTHING. NEVER GIVE
ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.
Fire Fighting
Flash Point:410F/210C(COC)
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:WATER MAY CAUSE FROTHING
Accidental Release
Spill Release Procedures:AVOID PROLONGED SKIN CONTACT WITH USED MOTOR
OIL.USE FLOOR DRI ABSORBENT FOR SMALL SPILLS.MOP OR PUMP LARGE
SPILLS.
Handling
Handling and Storage Precautions:STORE IN STEEL DRUM OR TANK BELOW
120F.
Other Precautions:EMPTY CONTAINERS MAY CONTAIN PRODUCT RESIDUE WHICH
COULD INCLUDE FLAMMABLE OR EXPLOSIVE VAPORS.
Exposure Controls
Respiratory Protection:ORGANIC RESPIRATOR IF HIGH VAPOR OR MIST
ANTICIPATED.
Ventilation:FOR OIL MIST.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS UNDATED.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:700F/371C
Vapor Pres:NIL
Vapor Density:>1
Spec Gravity:0.88
Evaporation Rate & Reference:<1,BUAC=1
Solubility in Water:NIL
Appearance and Odor:LIGHT AMBER COLORED LIQ.-FAINT PETROLEUM ODOR
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO,CO*2,TRACE OXIDES OR
SULFUR,ZINC,PHOSPHOROUS
Disposal
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.